* * *
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 14, 2024, 01:52:19 PM

Login with username, password and session length

104 Guests, 0 Users

Author Topic: Snell 2005 SA/or 2005 M Helmets Have Expired  (Read 4963 times)

0 Members and 1 Guest are viewing this topic.

Cagare

  • Administrator
  • :|
  • *****
  • Posts: 255
  • 2020 Club President
    • View Profile
Snell 2005 SA/or 2005 M Helmets Have Expired
« on: March 20, 2019, 09:24:06 AM »
Just a reminder that Snell 2005 SA and 2005 M helmets are no longer permitted for use as per ASN regulations and cannot be used at SASC events. They expired on December 31, 2018.

We have just over a month to our first event, so there should be enough time to replace your helmet, if you haven't already. I am sure people can make suggestions on good places to pick up a new helmet in this thread if needed.

ASN should be releasing the 2019 Autoslalom rules in the next week, I will link it once it is online.


Cagare

  • Administrator
  • :|
  • *****
  • Posts: 255
  • 2020 Club President
    • View Profile
Re: Snell 2005 SA/or 2005 M Helmets Have Expired
« Reply #1 on: March 21, 2019, 02:53:40 PM »
2019 Rules are now up. Thanks for the message Jackal!


http://www.asncanada.com/wp-content/uploads/2019/03/2019-ASN-Autoslalom-Regulations.pdf

(Copied and pasted from the regs)

4.5 Helmets

4.5.1 Drivers and passengers must wear helmets during all track sessions.

4.5.2 Acceptable helmets:
 FIA 8860-2004
 FIA 8860-2010
 FIA 8859-2015
 Snell 2015 SA, or 2015 M
 Snell 2010 SA, 2010 SAH, or 2010 M
 SFI Foundation 31.1/2015
 SFI Foundation 31.1/2010
 ECE R22.05 (expiry: ten years after date of manufacture as noted on unaltered,
helmet label)
 Snell 2005 SA, or 2005 M (expiry 31.12.2018)
 SFI Foundation 31.1/2005 (expiry 31.12.2018)


4.5.3 Helmets homologated to Snell M and ECE R22.05 standard are not acceptable
for use in vehicles equipped with roll cages.

4.5.4 Helmets must be in good condition both inside and outside.

4.5.5 It is strongly recommended that helmets be discarded due to deterioration, after
a serious accident or an impact to the helmet.

4.5.6 No helmet may be modified from its specification as manufactured, except in
compliance with instructions approved by the manufacturer. Hardware may be
mounted on a helmet for FIA/SFI approved HANS/FHR devices, provided the
hardware is installed in accordance with recommendations provided by the
manufacturer of the helmet and/or the devices.

4.5.7 Paint can react with helmet shell material and affect its protective capacity,
therefore, where a manufacturer provides guidelines or restrictions on the
painting or decoration of helmets; these must be followed.

4.6 Footwear
All competitors, workers, officials and crew members shall wear appropriate footwear
that fully covers the foot while driving and working on the course. Appropriate footwear
does not include sandals, slippers, open-toed shoes, etc.

 

Recent

Members
Stats
  • Total Posts: 11460
  • Total Topics: 1572
  • Online Today: 123
  • Online Ever: 419
  • (November 15, 2018, 01:04:55 PM)
Users Online
Users: 0
Guests: 104
Total: 104