This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Reijo
Pages: 1 2 [3] 4 5 ... 26
31
« on: October 16, 2018, 11:38:38 AM »
All Hallow's Eve is on MSReg and you can sign up for October 28th now: http://msreg.com/20181028halloweenBring your costume! Or put your best face on! 
32
« on: October 16, 2018, 09:13:27 AM »
Got word from Budget (etc) that we are good to rent their YYC lot until the end of November. So, October 28th is a go as long as we have the weather obviously. Don't put your toy away yet! Or try your winter beater out to see what it does? Also any winter schools we can host may be best done in November just in case. The lot works well for the winter schools as we noted this past year and a week or so ago. Reijo
34
« on: October 13, 2018, 05:51:06 AM »
Apparently I have a meeting in Leduc at 8:30 am on Sunday (WCMA) so I need some help: Make sure we have a General Waiver printed and on-site to sign, Tech forms, Parent/under 18 waivers and course maps!
ALSO: I know there will be some new people there so if we can have someone do a novice course walk, that would be good also ... and coordinate getting them some ride-alongs and some coaching if possible.
TIA!
35
« on: October 12, 2018, 12:06:17 PM »
Honda (? early '80's ... not sure actually) 13" steel wheel, 4x4.5 (114.3 mm) bolt pattern, old mostly worn 155-80-13 tire on it.
I have had it as a spare for my trailer but the bolt pattern is not the same ... does not work.
If anyone has a need for it, let me know and you can have it - FREE.
Otherwise I will recycle it or throw it out etc.
36
« on: October 12, 2018, 10:40:06 AM »
My truck is sold so I have these studded Kumho tires (235-70-16, about 1/2 or better thread left on black alloy mags (16x8, 6 bolt pattern, -6 offset) - fits T100, Tacoma, Forerunner etc. No curb damage etc. but the center caps could use a re-furbishing.
Just bolt 'em on!
$300
37
« on: October 11, 2018, 10:57:44 PM »
attached .... minor changes to the last course ... the kink coming into and out of the Istanbul triple apex is opened up maybe 10' or so and the Istanbul corner is now reversed!
This is scanned in at 11x17 but can be printed 8.5 x 11 (or whatever you like).
Reijo
38
« on: October 11, 2018, 07:19:20 AM »
I will be in Leduc for the WCMA AGM and have to go to a job site up that way on Friday so I'm gone as of tomorrow morning early.
I need someone or group of persons to help setup on Saturday (essentially the same course as last time ala Porsche Club course with some minor variations).
Please let me know if you are available and I will email you course maps.
39
« on: October 08, 2018, 06:05:59 PM »
Well, we got luck and have another event at YYC. You can sign up here: http://msreg.com/SASCYYCB1Reijo
40
« on: October 02, 2018, 01:53:22 PM »
A foot of snow and lookit what we can do! This will be rather informal (you can come out and mess around or take some instruction) ... There will be no classroom. The course will be a short circuit around the lot similar to what we did last winter that worked quite well and was fun to drive! The plan would be to setup in the late afternoon .... perhaps 4 pm ... shouldn't take much more than 1/2 hour since there is no chalking and the no. of cones is very limited. Let me know if you are available to help setup ... 1 or 2 guys is all I'd need ... if that really. Sign up here: http://msreg.com/WDT1Oct32018Th
41
« on: October 01, 2018, 09:05:28 AM »
2018 Western Canada Motorsport Association (WCMA) Annual General Meeting (AGM), Convention and Awards Dinner
Annual General Meeting and Convention Information
When – Saturday, October 13, 2018
Time - 9:00 am to 4:00 pm
Where – Executive Royal Hotel Edmonton Airport, 8450 Sparrow Drive, Leduc, Alberta, T9E 7G4
Cost – FREE!
Registration – None
Event Schedule
8:30 Coffee
9:00 Welcome
9:30 Discipline Workshops – Race, Solo, Race Official
12:00 Break for lunch
1:30 Reconvene Workshops
3:30 Wrap-Up
Why You Should Attend – This is a great opportunity to spend time with your fellow competitors and officials/workers to discuss any rule changes you would like to bring forward, as well as to find out what rule changes are being brought into effect by WCMA.
Agenda Items – Please forward any agenda items for any of the workshops (Race/Vintage, Solosport or Race Officials) to me by no later than October 10, 2018.
Come on out to the 2018 Awards Dinner
Awards Dinner Information
When – Saturday, October 13, 2018
Time – Cocktails 6:00 pm, Dinner 7:00 pm
Where – Executive Royal Hotel Edmonton Airport, 8450 Sparrow Drive, Leduc, Alberta, T9E 7G4
Cost – $40.00 per person
Individuals requiring a guest room must contact the Reservation Agent using the hotel’s direct line: 888-388-3932. WCMA has a special room rate, so don’t forget to mention WCMA.
E-mail dinner ticket requests to sue@somedaysoon.ca.
Tickets will be paid for at the door (cash or cheque only). Deadline for dinner ticket orders is Wednesday, October 10, 2018.
Please note that an email confirmation of your dinner ticket order will be done. If you don’t receive a confirmation email from me, then we don’t know you are coming.
If you have any special menu requirements (vegetarian etc.) please let me know.
Let’s get out there and cheer for our 2018 Solosport and Race Champions and thank all of the track workers for their hard work this season – everyone deserves it!
42
« on: October 01, 2018, 12:48:53 AM »
Photos from Sept 30. I caught most people but probably not everyone due to running/time constraints etc. ... however some more photos from the pits areas also. ... enjoy! https://20180930sascyycevent14.shutterfly.com
43
« on: September 29, 2018, 06:52:47 PM »
course map attached below.
I will also bring hard copies to the site.
Cheers,
Reijo
44
« on: September 28, 2018, 05:39:51 PM »
Anyone find a red air pump at YYC (this is the last time I remember using it) or Fort Macleod (Cdn. Tire bought unit with a digital display and pre-set pressures about 8"x8"x1.5" thick)?
45
« on: September 26, 2018, 08:17:31 AM »
We'll be doing setup on Saturday afternoon say 1 pm ff.
So if you want an early look at the course, this is your chance.
Let me know if you can help out!
Reijo
Pages: 1 2 [3] 4 5 ... 26
|
Show Posts