2018 - SASC Schedule/Rules/Info

[Wayne Dyck]

I suggest Avery self laminating sheets available at any Staples store. Laminate your tech sticker, then you can tape it to the windshield and remove post event for the street.

[Wayne Dyck]

Placement visibility and continuity between vehicles, along this year’s helmet tech sticker placement continuity,  are necessary for easy grid and start worker verification during events.

[MurrayPeterson]

BTW -- is the SASC helmet sticker designed to not interfere with SCCA bar code and helmet tech placements?

Jo and I travel a lot, and have to deal with multiple club's tech and bar code sticker requirements for both our car and our helmets.  Laminating the tech sticker and taping it to our windshield is a perfectly acceptable compromise.

[94boosted]

Placement visibility and continuity between vehicles, along this year’s helmet tech sticker placement continuity,  are necessary for easy grid and start worker verification during events.

Exactly, the grid folks and starter need to be able to easily see the tech sticker.

BTW -- is the SASC helmet sticker designed to not interfere with SCCA bar code and helmet tech placements?

Where it goes on the helmet is up to you, so long as the grid folks and starter can easily see it.

[Reijo]

Helmet sticker is about the same size as the SCCA one ... quite small.

R

[threeotwo]

BTW -- is the SASC helmet sticker designed to not interfere with SCCA bar code and helmet tech placements?

Jo and I travel a lot, and have to deal with multiple club's tech and bar code sticker requirements for both our car and our helmets.  Laminating the tech sticker and taping it to our windshield is a perfectly acceptable compromise.

Helmet sticker is 1.5x1.0".  If you put it to the left, right, top or bottom of your other stickers it should not interfere 

[MurrayPeterson]

If it doesn't have a bar code, then all is good.

[threeotwo]

No worries there.  Just being used to indicate the helmet has been checked and complies with the rules.

[94boosted]

Registration for the first event is open

msreg.com/april15practice

[Bitters]

fyi ssc is solo spec coupe, not super spec coupe

[jordan13]

The link to apply for membership on MSReg doesn't work, the only option on there is the April 15 practice....

[Pat S]

The link to apply for membership on MSReg doesn't work, the only option on there is the April 15 practice....

Looks like it's working now.

https://www.motorsportreg.com/events/southern-alberta-solosport-club-sasc-membership-923684

[jordan13]

That's a different link, I was trying the one in the first post in this thread. Anyway it worked, thanks Pat!

[94boosted]

^ Fixed, thanks

[Ryan S]

I put my tech sticker near the top of a piece of card stock, that wedges nicely between the dash and windshield in the lower left corner.  Easy for the starter/grid workers to see, and easy to remove.  I too, do not want any racing stickers etc. on the car for street driving.